Our technical department received a call recently where the end user was looking for a corrosion resistant motor, due to environmental conditions, but didn't want to spend the dollars on a all stainless steel and didn't want to have paint on the motor either.  Well, we suggested Techtop as the one to review, due to the fact that they are known for making an aluminum motor!  These motors are Totally enclosed motors are suitable for use in dusty, dirty locations and humid environments and the Totally Enclosed Fan-Cooled (TEFC) - exterior surface of the motor is cooled by an external fan on the motor shaft. Motor cooling is therefore dependent on motor speed

Techtop motors other product offerings include a wide range of single and 3 phase motors. Techtops main products are are standard and premium NEMA and IEC motors up to 200 HP, with aluminum, cast iron and roll steel casings.  On our website we offer up to 10 HP, other HP are available on requests.

• Available in rigid base or C-face
• 2, 4 and 6 poles
• NEMA Premium, Inverter Duty
• 1 to 10 hp
• TEFC Aluminum
• Removable feet
• 1045 steel shaft
• Shielded bearings
• UL 1004 approved
• 1.25 service factor
• Double lip oil seals
• 36 month warranty!
• 40° ambient rating
• Vacuum impregnation
• 50Hz capable at 1.0 SF
• Conduit box is 90° rotatable
• Corrosion resistant hardware
• F1, F2, F0 convertible (shipped F1)
• Tropicalization on stator winding
• Nipple seals between conduit box and body
• One-way sintered brass condensate drains
• Class 1, Division 2
• Groups C and D Compliant

Contact Marshall Wolf Automation for all your motor needs, we carry TECHTOP and WEG, LEESON and GROSCHOPP.  Visit us at wolfautomation.com, save us in your favorites.  Or call us at 1-847-658-8130 or email us at Sales@wolfautomation.com.   We can help!