Recora Presence Detection Mats/Switchmats® series 12, 15 & 30 have been designed for presence sensing applications for stand alone operator detection in smaller areas.

Just place your Recora Switchmat on a smooth surface, connect lead wiring and you're ready!

Depending on how these Switchmats are combined with the machine control wiring, these models can require the operator to step on the Switchmat, or off the Switchmat, before the machine will cycle or operate. Series 12, 15 & 30 are thin (3/8") versatile Switchmats; perfect coverage when actuating bells, alarms, door signals or safety cut-outs.

Recora Series 12 & 30 Switchmats have a corrugated surface with a molded ramp edging. Series 15 has a smooth surface with molded blunt edge.

When HD (dual leads) Series Switchmats are being used for machine protection, the Recora Fail-Safe control (FSC-6) provides fail-safe operation against severed leads, transformer failure or power outage.

Recora is made in the U.S.A.!

We can easily cross all the popular safety mat brands including Rockwell Automation (Allen Bradley) MatGuard, Tapeswitch and Larco.

• Switchmats are completely molded, not laminated
  • Mats resist dirt, oil, weld splatter and most harsh industrial liquids
  • Series 12, 15 & 30 are active over 95% of their surface areas
• Mats are designed for low voltage operation
  • Class II N.E.C. circuit operation, 100 watts at 24 volts AC or DC
  • Switch is single pole, single throw, normally open, momentary contact type.
• Standard sensitivity is 10-15 lbs.
• 6'-18 gauge 2-conductor lead
• Switchmats are .375" thick, completely molded
  • Not laminated! This helps prevent fluid entry
• 2-wire, operator detection mat, non-safety
• Choose from 12, 15 or 30 series:
  • 12 series is corrugated top, molded ramp edge, standard brown color (optional black or yellow)
  • 15 series is smooth top, molded blunt edge, standard black color (optional brown or yellow)
  • 30 series is corrugated top, molded ramp edge, standard black color (optional brown or yellow)
• Switch is single pole, single throw, normally open, momentary contact type.
• Made in the USA!

Marshall Wolf Automation is your industrial supply distributor for RECORA switchmats, contact us on the web at www.wolfautomation.com, or email us at sales@wolfautomation.com, or call us at 847-658-8130.  Get with the Wolf! we can help!

As your authorized Recora Switchmat distributor we can quote a competitive product and get you quick delivery!

Recora manufacturers, design and engineers their full line of standard and custom electrical switchmats and flexible pressure sensitive switches... right in the USA. Even better it's right up the road from us here in Illinois!

If you require presence or absence detection you need to take a look at this line. 

Recora products are popular in machinery safety, auto industry, automated equipment and in personnel/vehicle detection.

Take a look at our full line of Recora products including the popular Switchmat safety mats and Neptune industrial foot switches.

Recora Switchmat series EHD (Extra Heavy Duty) safety mats have been designed for safety and presence sensing applications for stand alone operator detection in smaller areas.

The Extra Heavy Duty series from Recora is used in applications that require the mats to withstand heavier equipment used in everyday operations.   Just place the Recora Switchmat on a smooth surface, connect lead wiring and you're ready!

Depending on how these Switchmats are combined with the machine control wiring, these models can require the operator to step on the safety mat, or off the safety mat before the machine will cycle or operate. Recora Switchmat Series EHD are thin (3/8") versatile safety mats; perfect coverage when actuating bells, alarms or door signals. Series EHD Switchmats have a corrugated surface; by adding Recora's Snap-On Aluminum Connectors and Edging, Series EHD can be configured to fit any size area needed.

Recora safety mats are completely molded, not laminated - mats resist dirt, oil, weld splatter and most harsh industrial liquids. As with all Recora Switchmats, Series EHD are active over 100% of their surface areas. Mats are designed for low voltage operation, Class II N.E.C. circuit operation, 100 watts at 24 volts AC or DC. Switch is single pole, single throw, normally open, momentary contact type.

• Available in:
  • Extra heavy duty, 2-wire corrugated top, molded ramp edge
  • Extra heavy duty, 2-wire smooth top, molded blunt edge
  • Extra heavy duty, corrugated top, snap on aluminum trim
    • Safety mat offered with 4-wire dual leads, for fail safe control
    • Sensor mat offered with 2-wire single lead, for presence detection
• Molded plastisol cover
• Overall thickness is .375"
• Shore A hardness 80 +/3
• Activation pressure is <300 N, typical activation pressures 50 – 60 lbs.
• Maximum load capacity is 4,500 psi
• S.P.S.T normally open switch, 24V AC/DC
• Standard lead length is determined by the Safety Mat model selected, additional cable length is available
• 16 gauge bottom plate, 16 gauge top plate
• 65 durometer silicone spacers
• 18 gauge 2 conductor lead wire, mechanically fixed to the electrode, other cables available. (Quick disconnects.)
• Standard colors are yellow or black
• High load bearing capacity (forklifts)
• High impact resistance
• Switchmats are totally molded, not laminated, to help prevent fluid entry

When looking for Safety Mats, Marshall Wolf Automation, is your safety mat headquarters!  Contact us at sales@wolfautomation.com or 847-658-8130 and ask for inside sales. 

Marshall Wolf Automation is excited to announce that we are now your authorized Recora distributor!

A few highlight about the product line include:

• Made in the USA - right in Batavia, IL
• Popular Recora Switchmats are completely molded to prevent fluid entry (not laminated!)
• Recora Neptune NF-2 Foot Switches are ideal for actuating machinery, doors and alarms with the touch of a foot
• Recora Sensi-Switch is the solution when you need flexible, reliable sensing in a harsh, hazardous work environment
• Recora specializes in customization on any of their products
• Recora N series is an automatic vehicle detector for commercial and industrial use. You'll love this for car washing applications!

Marshall Wolf Automation is your industrial automation distributor for anything you need in presence detection including safety mats, vehicle detection sensors, safety switches, foot switches and more.

Search all of our Recora products now!