Autonics CT Series Counter/Timer Upgraded!

Tuesday, November 29, 2011 by Beckie Bordenaro
autonics temperature controllerAutonics has recently upgraded their popular CT series of multifunction timer/counters.

What's new? Here is a list of the Autonics CT series upgrades:
  • Common (for both Counter and Timer):
    • Built-in Modbus communication function (communication model)
    • Increase contact capacity to 5A (CTS and CTM series)
    • Available to set the One-Shot output time (0.01 sec to 99.99 sec)
  • Counter Upgrades:
    • 0.00001 to 999999 (4 digit 0.001 to 9999)
    • Added BATCH counter function (CTM series)
    • Available to set count start point (initial value)
    • Added Up-1/ Up-2/ Down-1/ Down-2 input modes
    • Added TOTAL/HOLD operation modes in the indicator
  • Timer Upgrades:
    • Ability to select memory protection function in the indicator
    • Added range; 6 digit 999.999s/9999m59/99999.9h, 4 digit: 9.999s
    • Added TOTAL/HOLD/On Time display operation modes in the indicator
    • Added INT2/NFD/NFD.1/INTG output modes
Marshall Wolf Automation is your authorized industrial automation distributor for the complete line of Autonics temperature controllers and temperature control products, emergency e-stops and pushbuttons, inductive and capacitive proximity sensors and miniature photoelectric sensors.

View all of our Autonics products now!

Comments for Autonics CT Series Counter/Timer Upgraded!

Leave a comment





Captcha